Sign up to unlock all our services and 15164 corrected and explained questions.
Question 287-1 : Before transmitting the pilot should... ? [ Attainment AIM ]
Listen out on the frequency to ensure no interference with another station already transmitting will occur.
Question 287-2 : During radar vectoring, the controller asks the pilot of xy abc to turn on to heading 360°. the correct read back of this instruction is ?
Heading three six zero, x bc.
Question 287-3 : Fastair 345 has been instructed standby 118.9 for tower. what does this instruction mean ?
Fastair shall change to frequency 118.9 and listen out, but the tower will initiate further communications.
Question 287-4 : Fastair 345 has been instructed to contact stephenville arrival on frequency 118.0. what is the correct way to indicate it will follow this instruction ?
118.0 fastair 345
Question 287-5 : The abbreviation papi stands for ?
Precision approach path indicator.
Question 287-6 : How shall a pilot inform the control tower that he has to abandon the take off manoeuvre ?
Stopping
Question 287-7 : How should the instruction to contact stephenville radar on 132.00833mhz be phrased ?
Contact stephenville radar 132.010
Question 287-8 : In case of a ssr transponder failure occuring after departure of an ifr flight, the pilot shall ?
Inform the competent atc unit immediately.
Question 287-9 : In case the transponder fails before the departure for an ifr flight, the pilot shall ?
Obtain prior permission by atc to conduct the flight
Question 287-10 : Must a general call be acknowledged ?
No.
Question 287-11 : On the readability scale what does readability 1 mean ?
Unreadable.
Question 287-12 : The aircraft has started a descent. select the correct radiotelephony transmission. ?
Leaving fl 200, descending to fl 120.
Question 287-13 : The time is 4 15 p.m. what is the correct way of transmitting this time if there is any possibility of confusion about the hour ?
One six one five.
Question 287-14 : The time is now 1123. radar control requests your estimate for next reporting point, which is aal vor/dme..you look at your operational flight plan and estimate 12 minutes 36 nm to go to the reporting point. your transmission is ?
Estimate aal at three five.
Question 287-15 : To indicate that he is no longer occupying the active runway a pilot shall report to the controller ?
Runway vacated.
Question 287-16 : What does the instruction fastair 345 recycle 1240 mean ?
Fastair 345 is requested to reselect assigned mode and code 1240.
Question 287-17 : What does the instruction 'fastair 345 standby 118.9 for tower' mean ?
Fastair 345 should listen on frequency 118.9 on which tower will initiate further communications
Question 287-18 : What does the phrase break break mean ?
It indicates the separation between messages transmitted to different aircraft in a very busy environment.
Question 287-19 : What does the phrase check mean ?
Examine a system or procedure.
Question 287-20 : What does the term air ground communication mean ?
Two way communication between aircraft and stations or locations on the surface of the earth
Question 287-21 : What does the term broadcast mean ?
A transmission of information relating to air navigation that is not addressed to a specific station or stations.
Question 287-22 : What does the term clearance limit mean ?
The point to which an aircraft is granted an air traffic control clearance.
Question 287-23 : What does the term expected approach time mean ?
The time at which atc expects that an arriving aircraft, following a delay, will leave the holding point to complete its approach for a landing
Question 287-24 : What does the term way point mean ?
A specified geographical position used to define an area navigation route or the flight path of an aircraft employing area navigation
Question 287-25 : What does the word acknowledge mean ?
Let me know that you have received and understood this message.
Question 287-26 : What does the word approved mean ?
Permission for proposed action granted.
Question 287-27 : What does the word cancel mean ?
Annul the previously transmitted clearance.
Question 287-28 : What does the word check mean ?
Examine a system or procedure.
Question 287-29 : What does the word contact mean ?
Establish radio contact with....
Question 287-30 : What does the word correct mean ?
That is correct.
Question 287-31 : What does the word disregard mean ?
Consider that transmission as not sent.
Question 287-32 : What does the word monitor mean ?
Listen out on frequency.
Question 287-33 : What does the word negative mean ?
That is not correct.
Question 287-34 : What does the word negative mean ?
Permission not granted.
Question 287-35 : What does the word recleared mean ?
A change has been made to your last clearance.
Question 287-36 : What does the word 'wilco' mean ?
I understand your message and will comply with it.
Question 287-37 : What is meant by the phrase readability 4 ?
Readable.
Question 287-38 : What is meant by the phrase readability 2 ?
Readable now and then.
Question 287-39 : What is the correct call sign of fastair 345 in the initial call to the aerodrome control tower and the approach control unit, if the aircraft has a maximum take off weight of more than 136 tonnes ?
Fastair 345 heavy
Question 287-40 : What is the correct way for the pilot to acknowledge that atis information 'golf' has been received ?
Information golf
~
Exclusive rights reserved. Reproduction prohibited under penalty of prosecution.
11439 Free Training Exam